Raw Bang! Rider
(nothing about coloured Jelly Beans just things to help us create your unforgettable performance)
The following requirements will provide you with the best possible performance. Please check off each item once it has been arranged. You may need to forward this Rider to your AV supplier for assistance.
Audio Specifications
3 X Condenser Microphones
NOTE: Placement of these will be at the front of the stage low to the ground and out of sight. As the bins are thrown aggressively in the show.
2 X foldback (or more on larger stages) to be set as side fill to not visually impact the show
2 X 240V Power at the back of stage left and right
1 X PA system to suit the venue with Operator. It is requested that the operator watches and learn their cues in the show and is free from set up at sound check
NOTE: The backing contains many low frequencies and subs are mandatory.
1 X CD Plaayer or MP3 playback
The PA should be set up and sound checked before the scheduled rehearsal time.
Stage Specifications
Minimum stage size of 7 X 5 m clear space for Raw Bang!'s exclusive use
Stage pieces are to be secured to each other to prevent it from pulling apart
NOTE: Bang! create an extremely energetic show, this can cause the stage to pull apart during rehearsal and show unless it is hooked or tied together.
Stage floor must be wood and suitable for tap dancing on. A high quality black matte finish is preferred
NOTE: Dancing direct on concrete or wood placed on concrete causes physical harm to dancers.
Lighting Specification
The enhance the visual performance Raw Bang! use sticks that glow under a congo blue or slightly UV wash
NOTE: No strobe when Raw Bang! are throwing the bins. Any other time is fine.
Rehearsal Requirements
Please allow 1 hour uninterrupted to coordinate sound and lighting checks
General Requirements
Private and secure dressing room available from time of performance
Storage space available in the dressing room for equipment
Mirror
Water and soft drinks
Table and chairs